Your Cart Total
Engravers Bible: Charts
Welcome to the JPPlus Resource Center!
Your resource for support for: Engraving | Sublimation | Toner Heat-Transfer | UV-LED & more!

Recommended Stroke Width - For single stroke characters, width of cut should be approximately 12% of letter height. Example: 1/2" letter height = .500" x 12% = .060. For standard cutters, the maximum stroke width of a 1/8" diameter cutter is .125, an 11/64" diameter cutter is .171, and a 1/4" diameter cutter is .250.


Metric Conversion Chart