xTool Craft Oven Module for WonderPress

Get more out of your xTool WonderPress with the Craft Oven Module. From curing DTF powder for professional-quality transfers to sublimating mugs up to 11oz. and heat bending acrylic, this add-on gives you more ways to tackle projects that need controlled, even heat. It's a practical option for expanding your product offerings, experimenting with new materials, and taking on more custom work while keeping your workspace clean and organized.

Features

• Functions: Sublimation oven, DTF curing, and craft baking
• DTF Curing Area: Accommodates DTF films up to 17" x 17" (432 x 432 mm)
• Air Filtration: Built-in 3-layer filter system (H11 + Carbon + H13 HEPA)

Specifications

• Dimensions: 18.3" x 18.3" x 5.5" (465 x 465 x 140.7 mm)
• Weight: 9.5 lbs (4.33 kg)
• Chamber Dimensions: (W x D x H) 15.6" x 6.2" x 3.1" (398 x 158 x 80 mm)
• Replacement Filter Part Number: P0104001584
• Warranty: 1 year

What's Included:

• (1) Craft Oven Module
• (1) Mesh tray
• (1) Sealing frame
• (1) Heat insulation pad
• (2) Sublimation shrink wraps
• (2) Sublimation papers
• (1) Heat-resistant gloves
• Safety instructions
• Quick start guide

NOTE: The Craft Oven Module is an expansion accessory designed exclusively for the xTool WonderPress 3D Auto Heat Press. It must be connected to the main WonderPress unit to operate and cannot be used on its own.

Can this craft oven fit sublimation mugs?

This craft oven can fit up to three 11oz. sublimation mugs at one time using shrink wrap.

How do I use a WonderPress Craft Oven Module for sublimation and DTF curing?

For sublimation, wrap your design around a compatible blank, secure it with heat-resistant tape and shrink wrap, then place it in your WonderPress Craft Oven Module. Follow the recommended time and temperature settings for your blank, and carefully remove it using heat-resistant gloves.

For direct-to-film (DTF) transfers, apply DTF powder to the printed transfer film, then place it in the craft oven module to cure the powder using consistent, even heat. Once cured, the transfer is ready to be applied to a garment using your WonderPress heat press. Always follow the recommended curing settings for your specific DTF materials.