UNINET® DTF™ (Direct to Film) Heat Station/Oven

The UNINET® DTF™ Heat Station/Over is designed for curing DTF powder to the film, so you don't have to do so in an oven or other heating device. The high-quality design ensures reliability and long-lasting use.

They were designed as an in-line addition to any DTF printing setup with adjustable temperature and time controls.

Features:

• Compact design - Ensures safe placement on any tabletop or counter
• Available in two sizes - 13.8 in x 19.7 in and 16.5 in x 24 in
• Energy efficient design ensures low power consumption
• Adjustable vent
• Adjustable temperature and time
• New heating plate design for even and consistent heating
• Buzzer prompts when the countdown is over
• 110V - plugs into a regular outlet
• Use with Fume Extractor
• Recommended Temperature for A3 or larger sheets, use 125°C for 135 -145 seconds. For A4 or smaller sheets use 120° C for 120 seconds)

DTFHEATA2+

DTFHEATA3+

WARNING: WORK IN A WELL-VENTILATED AREA and use Protective Equipment when working with DTF products and processes, as fumes may be hazardous. DTF™ inks and film require a good humidity environment - over 40% humidity is highly recommended to minimize the risk of ink clogs and film buckling.