Stop Crimp Sleeves

Gyford Stop Crimp Sleeves are components used to create a fixed stop point on cable suspension systems. When crimped onto the wire, wire stop crimp sleeves prevent the cable from pulling through grippers, mounts, and fittings. Stop Crimp Sleeves keep signs, panels, and displays at the correct height and position.

Key Features:

• Gyford stop sleeve creates a permanent, fixed stop point on suspension wire
• Prevents cable pull-through in grippers, mounts, and hanging hardware
• Low-profile, concealed appearance once installed
• Requires standard crimping tool for installation
• Wire suspension stop sleeve for single use permanent connection once crimped

Available Sizes:

Applications:

• Suspended signage and hanging display panels
• Ceiling-mounted architectural graphics
• Gallery and art suspension systems
• Retail merchandising wire fixtures
• Wayfinding and directory displays
• Cable-supported panel assemblies
• Any wire suspension installation where cable position must remain fixed

What does a Stop Crimp Sleeve do?

Stop crimp sleeves slide onto a wire and, once crimped, form a permanent stop that prevents the cable from pulling through suspension hardware to keep panels secure.

Are Stop Crimp Sleeves reusable?

No, stop crimp sleeves are not reusable, as crimping forms a permanent connection. If repositioning is needed, the sleeve must be cut off and replaced with a new one.

Do Stop Crimp Sleeves require special tools?

A standard wire crimping tool is required to compress the sleeve onto the wire. Hand crimping without the proper tool is not recommended and may result in an insecure connection.