Siser EasySubli Vinyl Adhesive Transfer Sheet

ITEM # {{product.sku}}
{{reviewStars}}% of 100
{{reviewCount}} Reviews Add A Review
OVERVIEW

EasySubli transfer sheet is not intended to run through any printers but used to transfer vinyl pieces to your product.

EasySubli adhesive transfer paper makes it super simple to transfer your custom printed vinyl to your final product you are personalizing.

This clear sticky sheet is laid sticky side to the front of your printed EasySubli vinyl, to expose the heat-activated adhesive side to press to your item. This sticky adhesive easily keeps all the individual cut pieces together, giving you the ability to lay your vinyl with precision and confidence. The masking process is similar to sign vinyl: use a squeegee to bond the adhesive sheet and printed EasySubli HTV in order to keep multiple pieces aligned and applied all at once.

Now you don't have to try to place your individual pieces and make sure they are straight or have enough space between each graphic or letter.

After you have adhered your vinyl pieces to the clear EasySubli transfer sheet, place the transfer sheet holding your vinyl onto your product and press. Once you have pressed the EasySubli vinyl to your product, do a warm peel to remove the transfer sheet, leaving your full-color printed vinyl behind, permanently adhered to your item.

EasySubli Vinyl Adhesive Sheet Benefits:
  • Heat transfer vinyl adhesive transfer sheet
  • For use with vinyl
  • Easily transfer separate cut pieces of vinyl to substrate
Specifications:
  • Adhesive sticky sheet for transferring EasySubli heat transfer vinyl
  • Clear, silicone-based sheet on aerated backing
  • Extra tacky adhesive grip
Option 1 Process Instructions with EasySubli Heat Transfer Vinyl:
  • Feed the EasySubli paper directly through your sublimation printer, eliminating the need for transfer papers.
  • Place your printed vinyl under an open heat press to allow the ink to dry
  • Cut out your image/graphic in a cutter, and weed the image after it's finished
  • If your image has multiple separate pieces in it, you will need to use the EasySubli transfer/mask sheet when applying to your product.
  • Place the sticky side down on the transfer sheet to your printed graphic, and ensure your entire graphic is covered by the transfer sheet.
  • Then be sure to squeegee out any air bubbles and make sure the vinyl is all stuck to the transfer adhesive sheet.
  • If your image is one combined graphic, there is no need to use the transfer sheet step
  • Place your vinyl on your product you're personalizing, and press in a heat press

*Note: After printing, it is recommended to allow the inks to dry for two hours before masking, or you can lay your printed design under an open heat press for about 45 seconds.

Option 2 for Epson F570 & Best Vibrancy Instructions:
  • Print your graphic onto sublimation paper from your sublimation printer
  • Cut your vinyl shape in your cutter, and weed the image once it is finished
  • Place your blank vinyl shape onto your product you are personalizing and press for 5 seconds
  • Take your mirrored printed image and line it up on your blank vinyl and secure with heat tape
  • Press your sublimation paper/image to the vinyl applied to the product
  • Once finished, remove your sublimation paper from the graphic and let it cool

Click Here to find out all you need to know about the complete line of Siser® Heat Transfer Vinyls and other Siser® consumables from Johnson Plastics Plus.

EasySubli transfer sheet is not intended to run through any printers but used to transfer vinyl pieces to your product.

EasySubli adhesive transfer paper makes it super simple to transfer your custom printed vinyl to your final product you are personalizing.

This clear sticky sheet is laid sticky side to the front of your printed EasySubli vinyl, to expose the heat-activated adhesive side to press to your item. This sticky adhesive easily keeps all the individual cut pieces together, giving you the ability to lay your vinyl with precision and confidence. The masking process is similar to sign vinyl: use a squeegee to bond the adhesive sheet and printed EasySubli HTV in order to keep multiple pieces aligned and applied all at once.

Now you don't have to try to place your individual pieces and make sure they are straight or have enough space between each graphic or letter.

After you have adhered your vinyl pieces to the clear EasySubli transfer sheet, place the transfer sheet holding your vinyl onto your product and press. Once you have pressed the EasySubli vinyl to your product, do a warm peel to remove the transfer sheet, leaving your full-color printed vinyl behind, permanently adhered to your item.

EasySubli Vinyl Adhesive Sheet Benefits:
  • Heat transfer vinyl adhesive transfer sheet
  • For use with vinyl
  • Easily transfer separate cut pieces of vinyl to substrate
Specifications:
  • Adhesive sticky sheet for transferring EasySubli heat transfer vinyl
  • Clear, silicone-based sheet on aerated backing
  • Extra tacky adhesive grip
Option 1 Process Instructions with EasySubli Heat Transfer Vinyl:
  • Feed the EasySubli paper directly through your sublimation printer, eliminating the need for transfer papers.
  • Place your printed vinyl under an open heat press to allow the ink to dry
  • Cut out your image/graphic in a cutter, and weed the image after it's finished
  • If your image has multiple separate pieces in it, you will need to use the EasySubli transfer/mask sheet when applying to your product.
  • Place the sticky side down on the transfer sheet to your printed graphic, and ensure your entire graphic is covered by the transfer sheet.
  • Then be sure to squeegee out any air bubbles and make sure the vinyl is all stuck to the transfer adhesive sheet.
  • If your image is one combined graphic, there is no need to use the transfer sheet step
  • Place your vinyl on your product you're personalizing, and press in a heat press

*Note: After printing, it is recommended to allow the inks to dry for two hours before masking, or you can lay your printed design under an open heat press for about 45 seconds.

Option 2 for Epson F570 & Best Vibrancy Instructions:
  • Print your graphic onto sublimation paper from your sublimation printer
  • Cut your vinyl shape in your cutter, and weed the image once it is finished
  • Place your blank vinyl shape onto your product you are personalizing and press for 5 seconds
  • Take your mirrored printed image and line it up on your blank vinyl and secure with heat tape
  • Press your sublimation paper/image to the vinyl applied to the product
  • Once finished, remove your sublimation paper from the graphic and let it cool

Click Here to find out all you need to know about the complete line of Siser® Heat Transfer Vinyls and other Siser® consumables from Johnson Plastics Plus.

People Also Bought