Lonestar Durra-Bull Adhesive

The American-made heat-activated adhesive that guarantees a permanent, industry-leading bond. With Lonestar adhesive, you can feel confident knowing you're investing in a product that won't let you down! It is easily cut with a vinyl cutter or laser before, or after, application to the compatible material of your choice.

• Color: Clear
• Available in 12" and 24" wide rolls
  • Lengths:
    • 1 yd.
    • 2 yd.
    • 3 yd.
    • 5 yd.
    • 15 yd.
    • 25 yd.
• Polymer based adhesive
• Long shelf life
• High activation temp
• Water proof and dry cleaning safe

Applications:

• Genuine & Faux Leathers
  • Saddle Collection Leather-Like Sheet
• Acrylic & Other Plastics
  • LaserMax or Tri-Layer Rowmark Sheet
• PVC & Embroidery
• Twill, Wool, Denim
• Hardwood Veneers
• Various other laserable sheet

Recommended Products:

• Stahls Hotronix® 360 IQ Hat Press
• 16" x 20" Stahls Hotronix® Fusion IQ® Swing and Draw Heat Press
• 16" x 20" Geo Knight Digital DK20S Swing Away Heat Press

NOTES:

• In colder months, the adhesive will come away from the carrier sheet. When this happens, the adhesive needs to come back to a warmer temperature.
• Durra-Bull does not have a tacky surface and will require a heat source (t-shirt or hat press preferred) to activate and adhere to the back of your material.

Can you laser cut adhesive vinyl?

Yes, you can laser cut Lonestar Durra-Bull Adhesive! It is designed to be laser safe, making it a great option for detailed, precision cuts. You can also cut it with a vinyl cutter or scissors depending on your setup! Whether you’re creating custom patches, signage, or other layered projects, this adhesive is built to perform exceptionally well across the board!

How long do I press Lonestar Adhesive?

You can apply Lonestar Durra-Bull™ Adhesive using either a heat press or a household clothing iron. For best results with a heat press, set the temperature to 220°F and press for 10–12 seconds at medium pressure.

If using an iron, apply firm, even pressure, working outward from the center to smooth out any wrinkles or bubbles.

For step-by-step guidance and additional tips, refer to the Lonestar Adhesive How-To Document located in the Tech Tips/Downloads section of this product page.