Revolutionary new liquid mask product for laser processing! LiquaMASK applies seamlessly and quickly dries to form a robust and durable mask. This mask for laser engraving will shield the top surface of your substrate, preventing smoke damage or scorching during the engraving or cutting process. It's perfect for a spectrum of laser tasks, including color filling, light sandblasting, and deep engraving. Whether you're working with coated wood, engraving plastic, acrylic, glass, marble, coated metal, or any of the numerous other materials, LiquaMASK is your go-to masking liquid for glass and other surfaces.
How do I apply LiquaMASK?
Application is straightforward:
- Brush it onto the substrate
- Allow 20-30 minutes for drying.
- Engrave and cut
- Peel off after completion.
LiquaMASK looks really thick at first, is this normal?
Yes. LiquaMASK initially appears thick and might not seem smooth, give it a few minutes. You'll notice it settles into a smooth and consistent layer.
Is LiquaMASK hazardous?
LiquaMASK is non-hazardous and laser-safe.
How much will a gallon of LiquaMASK cover?
A single gallon can cover up to 16,000 square inches.
Weight | 9.000000 |
---|---|
UOM | EA |
Series | LiquaMASK |
Primary Color | Blue |
For Use With | Laser Engravers |
Volume | 1gal |
Product Type | Masking Material |
Additional Information | Shelf Life: 6 months |
1 star
0%
2 stars
0%
3 stars
0%
4 stars
0%
5 stars
100%
- GREAT! Buying more!0 people found this helpfulWe started with the pint bottle to try it out. It is a little on the pricey side, but well worth it for the amount of labor saved, and the quality of the engraving. We have used it on glass (our favorite), COATED wood (please be aware--if your wood is unfinished, or if it is bare bamboo, this product is VERY difficult to remove!), and on acrylics we are filling. Exceptional results for fills--much better than tape. Love it, and I am purchasing a gallon!
Revolutionary new liquid mask product for laser processing! LiquaMASK applies seamlessly and quickly dries to form a robust and durable mask. This mask for laser engraving will shield the top surface of your substrate, preventing smoke damage or scorching during the engraving or cutting process. It's perfect for a spectrum of laser tasks, including color filling, light sandblasting, and deep engraving. Whether you're working with coated wood, engraving plastic, acrylic, glass, marble, coated metal, or any of the numerous other materials, LiquaMASK is your go-to masking liquid for glass and other surfaces.
How do I apply LiquaMASK?
Application is straightforward:
- Brush it onto the substrate
- Allow 20-30 minutes for drying.
- Engrave and cut
- Peel off after completion.
LiquaMASK looks really thick at first, is this normal?
Yes. LiquaMASK initially appears thick and might not seem smooth, give it a few minutes. You'll notice it settles into a smooth and consistent layer.
Is LiquaMASK hazardous?
LiquaMASK is non-hazardous and laser-safe.
How much will a gallon of LiquaMASK cover?
A single gallon can cover up to 16,000 square inches.
Weight | 9.000000 |
---|---|
UOM | EA |
Series | LiquaMASK |
Primary Color | Blue |
For Use With | Laser Engravers |
Volume | 1gal |
Product Type | Masking Material |
Additional Information | Shelf Life: 6 months |
People Also Bought
We Recommend These Products

Affirm offers simple, transparent financing on equipment and supplies to help you reach your goals.

Quickspark is committed to your success and wants to be in your corner.
Learn more about our financing partners and how they can help you grow your business at jpplus.com/financing.
Showing 0 comments