Your Cart Total
{{price(cart.subtotal - cart.discount)}}
Hardwire Power Supply For up to 14 Led Units
OVERVIEW
The preferred option for hiding wires for an LED standoff sign in a wall. This 24 volt, 7 watt single output hardwire power supply can power up to 14 LED Standoffs up to 60 feet away without a voltage drop.  It is UL 8750, EN61347, and EN 61347-2-13 certified. It has a start up time of <1 second and a hold-up time of 18ms. The input voltage range is 90-295 VAC or 120-415 VDC. Please note that a qualified electrician must install this power supply and the customer is responsible for complying will their local and national building/electrical codes.Â
CAUTION:
- LED parts are fragile, handle with care.
- Requires 13/16" hole in material, minimum thickness 1/4"
- Performance will vary based on material type
- All LED's are tested prior to shipment.
- Verify operation within 48 hours of receipt. No returns after 48 hours.
- For installation instructions, visit www.standoffsystems.com
The preferred option for hiding wires for an LED standoff sign in a wall. This 24 volt, 7 watt single output hardwire power supply can power up to 14 LED Standoffs up to 60 feet away without a voltage drop.  It is UL 8750, EN61347, and EN 61347-2-13 certified. It has a start up time of <1 second and a hold-up time of 18ms. The input voltage range is 90-295 VAC or 120-415 VDC. Please note that a qualified electrician must install this power supply and the customer is responsible for complying will their local and national building/electrical codes.Â
CAUTION:
- LED parts are fragile, handle with care.
- Requires 13/16" hole in material, minimum thickness 1/4"
- Performance will vary based on material type
- All LED's are tested prior to shipment.
- Verify operation within 48 hours of receipt. No returns after 48 hours.
- For installation instructions, visit www.standoffsystems.com