Cermark LMM6060 Metal Marking Paste

CerMark LMM-6060 creates a rich, black color when laser engraved on to a wider variety of metals including steel, stainless steel, brass, bronze and aluminum. LMM-6060 has increased adhesion capabilities and is recommended for polished aluminum and chrome products. The next-gen water based formula has a neutral pH factor and will not stain metals when applied. An important safety factor is CerMark LMM-6060 dries hard to the touch and not to a powder form. The un-engraved CerMark LMM-6060 is safe to go down the drain when washed with water. Available in 25g, 100g, 250g, and 500g bottles.

The 25 grams of solution will cover an estimated 250+ square inches when applied using a brush and an estimated 500+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 250 square inches, Spraying 2:1 - 500 square inches. Bottle is much larger than 25g, so may appear empty at first glance.

The 100 grams of solution will cover an estimated 1000+ square inches when applied using a brush and an estimated 2000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 1000 square inches, Spraying 2:1 - 2000 square inches.

The 250 grams of solution will cover an estimated 2500+ square inches when applied using a brush and an estimated 5000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 2500 square inches, Spraying 2:1 - 5000 square inches.

The 500 grams of solution will cover an estimated 5000+ square inches when applied using a brush and an estimated 10000+ square inches when applied using the spray method. Coverage (When mixing with denatured alcohol): Brushing 1:1 - 5000 square inches, Spraying 2:1 - 10000 square inches.