Can I print the clear ink over the color ink before it is dry?
Welcome to the JPPlus Resource Center!
Your resource for support for: Engraving | Sublimation | Toner Heat-Transfer | UV-LED & more!
For best results, ensure the color ink is dry prior to overprinting it with the clear ink, except when using simultaneous clear applications like the DCS InkMark™ print modes. In normal production, this will occur with standard print times. For small samples, insure the color image is dry by either delaying the clear ink pass or utilizing "full width print" in the print options portion of your printer package.
If you have any other questions on UV-LED printing, please contact a Customer Service Representative via the Chat icon located in the lower right hand corner of any page, via email at firstname.lastname@example.org or by phone at 800-869-7800, Monday through Friday 8am to 8pm EST.